Cooling masterbatch

　　 is mainly used for PP, which can lower the temperature by 30-50 degrees.

　　 Brightening Masterbatch

Brightening masterbatch is also called bright masterbatch, the purpose is to improve the brightness of the product, its main brightener is ethylene bis-stearamide, the general color masterbatch is 20%-30%, and the product is 0.2%-0.3% , Too much will affect the printing effect of the product.

　　 During the production of reinforced masterbatch, sometimes the material is easy to accumulate in the discharge port, which is mainly caused by the air entrained by the talc powder. During production, it should be heated and stirred to melt the wax, wet the lubricating stone powder or add white mineral oil.

　　 Hygroscopic defoaming masterbatch

　　 Moisture-absorbing and defoaming masterbatch can remove the water content and unknown low-molecular-weight volatiles in the plastic, so that the plastic products have no splashes and bubbles, so that the drying process can be reduced while ensuring the quality of the products.

　　 Flame Retardant Masterbatch

　　 Flame retardant masterbatch is mainly used for flame retardant modification occasions,

　　 foaming masterbatch

　　 Foaming masterbatch is often used in PE, PP, EVA, etc.